国产欧美精品一区二区,中文字幕专区在线亚洲,国产精品美女网站在线观看,艾秋果冻传媒2021精品,在线免费一区二区,久久久久久青草大香综合精品,日韩美aaa特级毛片,欧美成人精品午夜免费影视

高精度紅外輻射源溫控系統硬件設計
DOI:
CSTR:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Hardware design of temperature-control system for high-accuracy infrared radiation source
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    隨著紅外成像技術的發展及其在探測領域應用的不斷創(chuàng )新,對設備使用的面源黑體的有效輻射面積、控溫精確性、輻射均勻性、調變溫速率等方面均提出了較高的使用要求。為了優化提升紅外輻射源的關鍵技術指標,一種基于帕爾貼效應的紅外輻射源得到有效應用,圍繞該紅外輻射源配套使用的溫控系統中的溫度采集精度以及模擬電路搭建的恒壓驅動等關鍵設計過程進行主要介紹,實驗室環境下利用選取的有效輻射面積為300mm*300mm的紅外輻射源進行溫度精確性、輻射穩定性、變溫速率等指標進行測試,測試結果表明紅外輻射源的均勻性可達到(0.05+0.02|Δt|)℃,升溫速率為8℃/min,降溫速率為2℃/min,升溫5℃并穩定時間為8min,能夠實現預期使用要求。

    Abstract:

    With the continuous innovation of the development technology of infrared imaging detection equipment, strict requirements were put forward for the effective radiation area, stability, uniformity, heating rate and cooling rate of the black body. In order to further improve the key technical parameters of the infrared radiation source, a surface type infrared radiation source based on the Peltier effect was developed.In this paper, the key design processes of the temperature control system which regulated the infrared radiation source were introduced in detail.It included the key design of high-precision temperature acquisition and constant voltage drive of semiconductor devices. Secondly, in the laboratory environment, infrared radiation source with the effective radiation area of 300 mm*300 mm was tested particularly. The results showed that the uniformity of the infrared radiation source could reach (0.05+0.02|Δt|)℃, the heating rate was 8 ℃ / min, the cooling rate was 2 ℃ / min,the stabilization time was five minutes when Temperature rose five degrees,which achieves the expected goal.

    參考文獻
    相似文獻
    引證文獻
引用本文

李侍林,王瑩瑩,杜世凱,馮隆興,宋春輝.高精度紅外輻射源溫控系統硬件設計計算機測量與控制[J].,2020,28(8):157-159.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2020-06-02
  • 最后修改日期:2020-06-16
  • 錄用日期:2020-06-16
  • 在線發布日期: 2020-08-13
  • 出版日期:
文章二維碼
家居| 康平县| 固镇县| 嵩明县| 吉木萨尔县| 威远县| 武清区| 成武县| 延吉市| 双辽市| 运城市| 滨州市| 毕节市| 溧水县| 钟祥市| 温州市| 西峡县| 双城市| 当阳市| 奉节县| 呼伦贝尔市| 乐都县| 安岳县| 遂溪县| 镇平县| 南城县| 谢通门县| 时尚| 永善县| 乐陵市| 福安市| 固安县| 宜宾市| 荔波县| 泗洪县| 化德县| 安岳县| 恩施市| 岑溪市| 修武县| 庄河市|